1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery release latch (1) and battery lock (2) inwards to release the battery.
3. Remove the battery from the computer (3).
Conserving battery power
●
From the Start screen, type power, select Settings, and then select Power Options.
●
Select low power-use settings through Power Options.
●
Turn off wireless and LAN connections and exit modem applications when you are not using
them.
●
Disconnect unused external devices that are not plugged into an external power source.
●
Stop, disable, or remove any external memory cards that you are not using.
●
Decrease screen brightness.
●
Before you leave your work, initiate Sleep, or shut down the computer.
Storing a user-replaceable battery
CAUTION: To reduce the risk of damage to a battery, do not expose it to high temperatures for
extended periods of time.
If a computer will be unused and unplugged from external power for more than 2 weeks, remove the
user-replaceable battery and store it separately.
To prolong the charge of a stored battery, place it in a cool, dry place.
NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent,
recharge the battery before returning it to storage.
Calibrate a battery before using it if it has been stored for one month or more.
Disposing of a user-replaceable battery
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short
external contacts; do not dispose of in fire or water.
See the
Regulatory, Safety and Environmental Notices
for proper battery disposal. To access this
guide, from the Start screen, type support, and then select the HP Support Assistant app. To
access battery information, select the HP Support Assistant app on the Start screen, and then select
Battery and performance.
Setting power options 35
To Next Page
Loading...
Need help?
General
Weight and Dimensions
