To Next Page

To Previous Page

Speaker

Description Spare part number

Speaker 456593-001

Before removing the speaker, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 37).

5. Remove the keyboard (see

Switch cover and keyboard on page 47).

6. Remove the switch cover (see

Switch cover and keyboard on page 47).

Remove the speaker:

1. Disconnect the speaker cable (1) from the system board.

2. Remove the two Torx T8M2.5×4.0 screws (2) that secure the speaker to the top cover.

3. Remove the speaker (3) from the top cover.

Reverse this procedure to install the speaker.

Component replacement procedures 51

Other manuals for HP 540

Questions and Answers:

Need help?

Do you have a question about the HP 540 and is the answer not in the manual?

General