To Next Page

To Previous Page

Top cover

NOTE: The top cover includes the TouchPad board and cable, and the TouchPad button board and

cable.

Description Spare part number

Top cover 500002-001

Before removing the top cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 37).

5. Remove the following components:

a. Hard drive (see

Hard drive on page 38)

b. Optical drive (see

Optical drive on page 45)

c. Keyboard (see

Switch cover and keyboard on page 47)

d. Switch cover (see

Switch cover and keyboard on page 47)

e. Speaker (see

Speaker on page 51)

f. Display lid switch module (see

Display lid switch module on page 52)

g. Display assembly (see

Display assembly on page 53)

Remove the top cover:

1. Turn the computer upside down, with the front toward you.

58 Chapter 4 Removal and replacement procedures

HP 540 User Manual

Other manuals for HP 540