Chapter 4
Configure and Troubleshoot
This chapter covers power-up following the hardware upgrade, and configuration of the newly
installed elements into the system using the firmware. Some troubleshooting is also included.
Examples show sample console displays for a GS1280 system. Two conventions are used:
1. Sections of console output that are not relevant to verifying this upgrade have been
deleted. They are represented in the example text as:
<< ------------ lines deleted ------------- >>
Relevant sections are highlighted. Your User Information CD has complete power-up
information.
2. Commands that you input are shown in boldface type, and underlined. For example:
show cable
Sections include:
• Notify server management of new members
• Run show cable and verify configuration
• Connect to partition
• Troubleshooting during console power-up
• Troubleshooting power during power-up
Configure and Troubleshoot 4-1
To Next Page
Loading...
Need help?
General