Top cover
NOTE: The top cover spare part kit includes the TouchPad.
Description Spare part number
Top cover for use in black HP 14 and Compaq 14 models (includes touchpad) 757613-001
Top cover for use in gray HP 14 and Compaq 14 models (includes touchpad) 758618-001
Top cover for use in white HP 14 and Compaq 14 models (includes touchpad) 758911-001
Top cover for use in red HP 14 and Compaq 14 models (includes touchpad) 758912-001
Top cover for use in blue HP 14 and Compaq 14 models (includes touchpad) 758913-001
Top cover for use in silver HP 14 and Compaq 14 models (includes touchpad) 760247-001
Top cover for use in HP 245 G3 models 758618-001
Top cover for use in HP 240/246 G3 models 773067-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 49), and then remove the following components:
●
Service cover (see
Service cover on page 55)
●
Keyboard (see
Keyboard on page 57)
To remove the top cover:
1. Position the computer upside down.
60 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
Need help?
General