EasyManuals Logo
Home>HP>Laptop>Compaq 2710p

HP Compaq 2710p Maintenance And Service Guide

HP Compaq 2710p
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground,
wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors,
use alligator clips to connect a wrist strap.
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can
be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective, the conductive strips must be worn in
contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
Antistatic tape
Antistatic smocks, aprons, and sleeve protectors
Conductive bins and other assembly or soldering aids
Nonconductive foam
Conductive tabletop workstations with ground cords of one megohm resistance
Static-dissipative tables or floor mats with hard ties to the ground
Field service kits
Static awareness labels
Material-handling packages
Nonconductive plastic bags, tubes, or boxes
Metal tote boxes
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material Use Voltage protection level
Antistatic plastic Bags 1,500 V
Carbon-loaded plastic Floor mats 7,500 V
Metallized laminate Floor mats 5,000 V
34 Chapter 4 Removal and replacement procedures

Table of Contents

Other manuals for HP Compaq 2710p

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq 2710p and is the answer not in the manual?

HP Compaq 2710p Specifications

General IconGeneral
Tjunction100 °C
FSB ParityNo
Processor cache2 MB
Processor cores2
System bus rate- GT/s
Processor familyIntel® Core™2 Duo
Processor socketLGA 3647 (Socket P)
Processor codenameMerom
Processing Die size143 mm²
Processor frequency1.33 GHz
Processor cache typeL2
Processor lithography65 nm
Processor manufacturerIntel
Processor front side bus533 MHz
Processor operating modes64-bit
Thermal Design Power (TDP)10 W
Number of Processing Die Transistors291 M
HDD speed4200 RPM
Optical drive typeDVD Super Multi
Total storage capacity120 GB
Display diagonal12.1 \
Display resolution1280 x 800 pixels
Native aspect ratio16:10
Internal memory2 GB
Memory clock speed667 MHz
Internal memory typeDDR2-SDRAM
Discrete graphics cardYes
Discrete graphics card modelIntel® GMA X3100
Maximum graphics card memory0.384 GB
TypePC
Modem speed56 Kbit/s
Dimensions (WxDxH)290 x 212 x 28.2 mm
Wireless technology802.11a/b/g/draft-n, a/b/g, b/g
Bluetooth version2.0+EDR
Operating system installedWindows Vista Business
Number of battery cells6
Serial ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Processor ARK ID33920
Processor package size35 x 35 mm
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth290 mm
Width212 mm
Height28.2 mm
Weight1650 g

Related product manuals