4. Remove the Bluetooth module and cable (4) from the base enclosure.
Reverse this procedure to install the Bluetooth module.
Speaker
Description Spare part number
Speaker 454695-001
Before removing the speaker, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 37).
5.
Remove the following components:
a.
Hard drive compartment cover (see
Hard drive on page 39)
b.
Keyboard (see
Keyboard on page 48)
c.
Hinge cover (see
Hinge cover on page 50)
d.
Top cover (see
Top cover on page 52)
e.
Audio connector board (see
Audio connector board on page 56)
f.
Bluetooth module (see
Bluetooth module on page 57)
58 Chapter 4 Removal and replacement procedures