HP Compaq Elite 8300 All-in-One User Manual

Antenna
The antenna route from the WLAN card to the top of the computer.
To remove the antenna:
1. Prepare the computer for disassembly (see
Preparing to disassemble the computer on page 32).
2. Remove the access panel (see
Access panel on page 36).
3. Remove the optical drive (see
Replacing the optical disc drive on page 47).
4. Remove the stand (see
Stand on page 38).
5. Remove the lower panel (see
Lower panel on page 40).
6. Remove the metal plate (see
Metal plate on page 41).
7. Remove the power supply (see
Power supply on page 80).
8. Remove the side panels (see
Side panels on page 78).
9. Remove the speakers (see
Speakers on page 76).
10. Remove the system board (see
System board on page 83).
11. Remove the front bezel (see
Front bezel on page 94).
Antenna 97

HP Compaq Elite 8300 All-in-One Specifications

General

Brand	HP
Model	Compaq Elite 8300 All-in-One
Category	Desktop
Language	English