HP Compaq Elite 8300 All-in-One User Manual

5. Remove the Torx screw (1) that secures the power connector to the computer, and then lift the
connector from atop the speaker (2).
Figure 7-62 Removing the power connector
6. Disconnect the cable from the system board connector (1).
7. Position the cable above the power supply (2).
Positioning the cable above the power supply makes it easier to slide the power supply
downward and out of the bracket that secures it.
Figure 7-63 Removing the power supply
Power supply 81

HP Compaq Elite 8300 All-in-One Specifications

General

Brand	HP
Model	Compaq Elite 8300 All-in-One
Category	Desktop
Language	English