2–2 Startup Guide
Docking and Undocking the Tablet PC
Connecting to a Power Source
The Docking Station must be connected to external power for
operation.
Å
WARNING: To reduce the risk of electric shock or damage to the
equipment:
■ Do not disable the power cord grounding plug. The grounding plug
is an important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that
is easily accessible at all times.
■ Disconnect power from the Docking Station by unplugging the
power cord from the electrical outlet.
■ Do not place anything on power cords or cables. Arrange them so
that no one can accidentally step on or trip over them. Do not pull
on a cord or cable. When unplugging from the electrical outlet,
grasp the cord by the plug.
To connect to a power source:
1. Connect the AC adapter cable to the AC power connector on
the back of the Docking Station 1.
2. Connect the power cord to the AC adapter 2.
3. Plug the power cord into an electrical outlet 3.
Connecting to a power source
334244-001.book Page 2 Monday, August 11, 2003 2:12 PM
To Next Page
Loading...
Need help?
General
