27–inch model
Component Function
1 USB ports (2) Connect USB devices.
2 Audio-out (headphone) jack Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable.
WARNING! To reduce the risk of personal injury, reduce the
volume before using headphones, earbuds, or a headset. For
additional safety information, see the Product Notices provided
on the optical disc, if one is included with your product.
NOTE: When a device is connected to the headphone jack, the
monitor speakers are disabled.
3 Master power switch Turns o all power to the monitor.
NOTE: Putting the switch in the O position will yield the
lowest power state for the monitor when not in use.
4 Power connector Connects the power cord.
5 USB Type–C port Connects the USB CM—CM or CM-AM cable from the source
device to the monitor.
6 DisplayPort port Connects the DisplayPort cable to the source device.
7 HDMI port Connects the HDMI cable to the source device.
8 VGA port Connects the VGA cable to the source device.
9 Audio line in port Connects the audio cable to the monitor.
4 Chapter 1 Getting Started
To Next Page
Loading...
Need help?
General
