HP Elite Slice G2 Service Manual

Connecting modules
Connecting modules
CAUTION: Before connecting modules, turn o the Elite Slice G2 and disconnect it from any AC power
source.
Modules cannot be “hot-plugged” or “hot-swapped.”
1. Remove/disengage the security cable, if one is attached.
2. Remove all removable media, such as USB ash drives.
3. Turn o the Elite Slice G2 properly through the operating system, and then turn o any external devices.
4. Disconnect the AC power cord from the Elite Slice G2 and disconnect any external devices.
5. If the VESA plate is connected, slide the quick release latch to the unlocked position and remove the
VESA plate.
6. Align the module connection port on the underside of the Elite Slice G2 with the module expansion
connector on the new module and press the computer down rmly.
You should hear a quiet click when the modules lock together. The module locks into place and hides the
release latch of the module above it.
Repeat until all modules have been connected.
Connecting the optional Slice VESA plate
If the VESA plate is connected, the Elite Slice G2 can be mounted onto a table.
CAUTION: Before connecting the VESA plate, turn o the Elite Slice G2 and disconnect it from any AC power
source.
1. Slide the quick release latch on the VESA plate to the unlocked position. Position the connected modules
over the VESA plate.
The VESA plate does not have a module expansion connector. Be sure that the ports of the Elite Slice G2
and the quick release latch and security cable slot of the VESA plate are all on the same side.
6 Chapter 1 Product features

HP Elite Slice G2 Specifications

General

Bus type	DMI3
Processor cache	6 MB
Processor model	i5-7500T
Processor threads	4
Processor frequency	2.7 GHz
Processor cache type	L3
Processor manufacturer	Intel
Processor boost frequency	3.3 GHz
Number of processors installed	1
Configurable TDP-down frequency	1.7 GHz
ECC	No
Internal memory	8 GB
Memory clock speed	2400 MHz
Internal memory type	DDR4-SDRAM
Maximum internal memory	- GB
Memory layout (slots x size)	2 x 4 GB
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
SSD interface	NVMe
Storage media	SSD
SSD form factor	M.2
Total storage capacity	128 GB
Intel Identity Protection Technology version	1.00
Sustainability certificates	ENERGY STAR
Discrete graphics card model	Not available
On-board graphics card model	Intel® HD Graphics 630
Maximum on-board graphics card memory	64 GB
Antenna type	2x2
Bluetooth version	4.2
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN controller model	Intel Dual Band Wireless-AC 8260
Ethernet LAN data rates	10, 100, 1000 Mbit/s
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Chassis type	USFF
Product color	Black
Country of origin	China
Audio chip	Conexant CX7501
Product type	PC
Motherboard chipset	Intel® Q170
Operating system installed	Windows 10 IoT Enterprise
HP segment	Business
Power supply	90 W

Weight and Dimensions

Width	165 mm
Height	112 mm
Weight	1520 g
Package depth	596 mm
Package width	203 mm
Package height	273 mm
Package weight	6670 g