To Next Page

To Previous Page

Battery

NOTE: You do not have to remove the battery to remove most computer components. Be sure to

disconnect the battery cable from the system board before removing any components.

Description Spare part number

3-cell, 43-Wh, 2.83-Ah, Li-ion battery 761230-005

Before removing the battery, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the top cover (see

Top cover on page 28).

5. Disconnect the battery.

Remove the battery:

WARNING! To reduce potential safety issues, use only the battery provided with the computer, a

replacement battery provided by HP, or a compatible battery purchased from HP.

1. Remove the three Phillips PM2.5×4.0 screws (1) that secure the battery to the computer.

Component replacement procedures 31

Questions and Answers:

Need help?

Do you have a question about the HP ENVY x360 Convertible PC and is the answer not in the manual?

HP ENVY x360 Convertible PC Specifications

General

Category	Laptop
Type	Convertible
Operating System	Windows 10, Windows 11
Touchscreen	Yes
Audio	Bang & Olufsen, Dual Speakers
Display Size	13.3 inches
Display Resolution	1920 x 1080, 3840 x 2160
Processor	Intel Core i5, Intel Core i7, AMD Ryzen 5, AMD Ryzen 7
RAM	8 GB, 16 GB
Storage	256GB SSD, 512GB SSD, 1TB SSD
Graphics	AMD Radeon Graphics, Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Bluetooth	Bluetooth 5.0
Ports	USB-C, USB-A, HDMI, Headphone/Microphone combo jack