HP ENVY x360 Convertible PC User Manual

Display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the top cover (see
Top cover on page 28).
5. Disconnect the battery.
To remove the display assembly:
1. Disconnect the left display panel cable (1) from the system board.
2. Disconnect the antenna cables (2) from the WLAN module.
3. Disconnect the right display panel cable (3) from the system board.
Component replacement procedures 53

HP ENVY x360 Convertible PC Specifications

General

Category	Laptop
Type	Convertible
Operating System	Windows 10, Windows 11
Touchscreen	Yes
Audio	Bang & Olufsen, Dual Speakers
Display Size	13.3 inches
Display Resolution	1920 x 1080, 3840 x 2160
Processor	Intel Core i5, Intel Core i7, AMD Ryzen 5, AMD Ryzen 7
RAM	8 GB, 16 GB
Storage	256GB SSD, 512GB SSD, 1TB SSD
Graphics	AMD Radeon Graphics, Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Bluetooth	Bluetooth 5.0
Ports	USB-C, USB-A, HDMI, Headphone/Microphone combo jack