HP ENVY x360 Convertible PC User Manual

TouchPad board
Description Spare part number
Touchpad board (includes cable) 774598-001
Before removing the touchpad board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
Top cover on page 28).
Remove the touchpad board:
1. Position the top cover upside-down.
2. Remove the three Phillips PM2.0×2.0 broadhead screws (1) that secure the TouchPad board to the
computer.
3. Lift to disengage the cable from the adhesive securing it to the computer (2).
4. Separate the touchpad board from the top cover by pulling it downward away from the top cover (3).
Reverse this procedure to install the touchpad board.
Component replacement procedures 33

HP ENVY x360 Convertible PC Specifications

General

Category	Laptop
Type	Convertible
Operating System	Windows 10, Windows 11
Touchscreen	Yes
Audio	Bang & Olufsen, Dual Speakers
Display Size	13.3 inches
Display Resolution	1920 x 1080, 3840 x 2160
Processor	Intel Core i5, Intel Core i7, AMD Ryzen 5, AMD Ryzen 7
RAM	8 GB, 16 GB
Storage	256GB SSD, 512GB SSD, 1TB SSD
Graphics	AMD Radeon Graphics, Intel Iris Xe Graphics
Wireless	Wi-Fi 6
Bluetooth	Bluetooth 5.0
Ports	USB-C, USB-A, HDMI, Headphone/Microphone combo jack