To Next Page

To Previous Page

Speakers

Description Spare part number

Speaker Kit (includes left and right speakers and cable) 807535-001

Before removing the speakers, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the top cover (see Top cover on page 27).

5. Disconnect the battery.

Remove the speakers:

1. Disconnect the speaker cable from the system board (1).

2. Remove the four Phillips PM2.5×5.0 screws (2) that secure the speakers to the computer.

NOTE: Rubber gaskets t around each screw (3). For installation, make sure the gaskets are properly

installed.

Component replacement procedures 35

Questions and Answers:

Need help?

Do you have a question about the HP ENVY x360 Convertible and is the answer not in the manual?

HP ENVY x360 Convertible Specifications

General

Series	ENVY x360
Convertible	Yes
Touchscreen	Yes
Display Size	13.3 inch / 15.6 inch
RAM	8GB or 16GB
Storage	512 GB SSD / 1 TB SSD
Graphics	AMD Radeon Graphics or Intel Iris Xe Graphics
Battery	3-cell Li-ion
Weight	1.32 kg
Ports	1x headphone/microphone combo
Wireless	Wi-Fi 6
Audio	Audio by Bang & Olufsen; Dual speakers
Processor Type	Intel Core i7 / AMD Ryzen 7