Table 3-4 Setup Utility—Advanced BIOS Features (continued)
Boot Up Numlock
Status
Select power on state for Numlock. Default is OFF.
Security Option Select whether the Password is required every time the system boots or only when you enter
Setup. Default is Setup.
POST Delay (secs) Set a delay that is added to POST to allow more time to press F10 to enter the Setup Utility.
Default is None.
F12 Boot Enable/Disable F12 network boot. Default is Enabled.
Setup Utility—Integrated Peripherals
Table 3-5 Setup Utility—Integrated Peripherals
Option Description
Integrated Audio Enable or Disable Onboard AC97 Audio controller. Default is Enabled.
Network Controller Enable or Disable Onboard LAN device. Default is enabled.
USB Controller Enable or Disable USB controller. Default is enabled.
Advanced USB
Options
Enable or Disable USB external ports. Default is enabled.
USB External Ports Default is enabled.
USB Keyboard
Support
Allows use of USB keyboard under DOS. Default is enabled.
USB Mouse Support Allows use of USB Mouse under DOS. Default is disabled.
Serial Port 1 Select serial port base IO port address and IRQ. Default is 3F8/IRQ4.
Parallel Port Select parallel port base IO port address and IRQ. Default is 378/IRQ7.
Parallel Mode Select parallel port transfer mode of Standard, EPP, ECP, or ECP/EPP. Default is ECP/EPP.
ECP Mode Use DMA Select DMA channel of 1 or 3 if parallel is operated in ECP mode. Default is 3.
22 Chapter 3 BIOS Settings, (F10) Utility
To Next Page
Loading...
Need help?
General