7
Installing the router
WARNING!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
IMPORTANT:
• The barcode on the router chassis contains product information that must be provided to local
sales agent when you return a faulty router for repair.
• Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want
to open the chassis, contact Hewlett Packard Enterprise for permission. Otherwise, Hewlett
Packard Enterprise shall not be liable for any consequence.
Installation prerequisites
• You have read "Preparing for installation" carefully.
• All requirements in "Preparing for installation" are me
t.
Installation flowchart
The following installation options are available for the router:
• Workbench mounting.
• Wall mounting.
• Rack mounting.
Determine the installation method according to the installation environment. Follow the installation
flowchart shown in Figure 2 to install the route
r.
To Next Page
Loading...
Need help?
General
