4–14 User Guide
Operating the Monitor
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat
panel screen to function like a standard monitor. Two controls in
the on-screen display can be adjusted to improve image
performance: Clock and Clock Phase.
✎
The Clock and Clock Phase controls are adjustable only when
using an analog input. These controls are not adjustable for
digital inputs.
✎
The Clock must first be set correctly since the Clock Phase
settings are dependent on the main Clock setting.
Use these controls only when the auto-adjust function does not
provide a satisfactory image.
■ Clock—Increase/decrease the value to minimize any vertical
bars or stripes visible on the screen background.
Input 1 Selects DVI-I 1input.
Input 2 Selects DVI-I 2 input.
Factory Reset Returns all OSD menu
settings to the factory default
setting, except the Language
setting.
Exit Exits the OSD menu screen.
OSD Menu
Icon Main Menu Submenu Description
To Next Page
Loading...
Need help?
General
