HP Invent LP2065 User Manual

C–6 User Guide
Agency Regulatory Notices
cross-sectional area of the wire must be a minimum of 0.75 mm²
or 18AWG, and the length of the cord must be between 6 feet
(1.8 m) and 12 feet (3.6 m). If you have questions about the type
of power cord to use, contact your HP authorized service
provider.
A power cord should be routed so that it is not likely to be walked
on or pinched by items placed upon it or against it. Particular
attention should be paid to the plug, electrical outlet, and the
point where the cord exits from the product.
Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this
product.
Ä
CAUTION: Do not use the power cord received with this product on
any other products.

HP Invent LP2065 Specifications

General

Brand	HP
Model	Invent LP2065
Category	Monitor
Language	English