HP J9729A User Manual

Example 19 The ip arp-age value in the running config file
HP Switch(config)# show running-config
Running configuration:
; J9627A Configuration Editor; Created on release #XX.15.XX
; Ver #01:01:00
hostname "Switch"
savepower led
mirror-port 7
stack commander "TEST_STACK"
stack member 1 mac-address 0024A8D13A40
ip arp-age 100
vlan 1
name "DEFAULT_VLAN"
untagged 1-28
ip address dhcp-bootp
exit
vlan 222
name "VLAN222"
no ip address
exit
snmp-server community "public" unrestricted
snmp-server host 16.181.51.82 community "public"
You can set or display the arp-age value using the menu interface (Menu > Switch Configuration
> IP Config).
Example 20 The Menu interface displaying the ARP Age value
===========================- TELNET - MANAGER MODE ======================
Switch Configuration - Internet (IP) Service
IP Routing : Disabled
Default Gateway : 15.255.120.1
Default TTL : 64
Arp Age : 1000
IP Config [Manual] : Manual
IP Address : 15.255.111.11
Subnet Mask : 255.255.248.0
Actions-> Cancel Edit Save Help
IP interface parameters for routing switches
Table 4 lists the interface-level IP parameters for routing switches.
Table 4 IP interface parameters — routing switches
See pageDefaultDescriptionParameter
1
None configuredA Layer 3 network interface
address; separate IP
IP address
addresses on individual
VLAN interfaces.
521 (one)A numeric cost the router
adds to RIP routes learned
Metric
on the interface. This
Overview 41

HP J9729A Specifications

General

Brand	HP
Model	J9729A
Category	Switch
Language	English