To Next Page

To Previous Page

4–10 User Guide

Operating the Monitor

✎

When adjusting the Clock and Clock Phase values, if the monitor

images become distorted, continue adjusting the values until the

distortion disappears. To restore the factory settings, select Yes

from the Factory Reset menu in the on-screen display.

Identifying Monitor Conditions

Special messages will appear on the monitor screen when

identifying the following monitor conditions:

■ Input Signal Out of Range— Indicates the monitor does not

support the input signal because the resolution and/or refresh

rate are set higher than the monitor supports. Set the

resolution and refresh rate for 1280 x 1024 at 60 Hz. Restart

your computer for the new settings to take effect.

■ Monitor Going to Sleep— Indicates the screen display is

entering a sleep mode.

■ Check Video Cable— Indicates the video cable is not

properly connected to the computer.

■ No Input Signal— Indicates the monitor is entering a reduced

power state but the power saving feature is set to off.

■ Auto Adjustment in Progress— Displays when auto

adjustment feature is active.

■ OSD Lock—The OSD can be enabled or disabled by pressing

and holding the Menu button on the front panel for 10

seconds. If the OSD is locked, the warning message “OSD

Lock” displays for ten seconds.

❏ If the OSD is locked, press and hold the Menu button for

10 seconds to unlock the OSD.

❏ If the OSD is unlocked, press and hold the Menu button

for 10 seconds to lock the OSD.

Other manuals for HP L1740

Questions and Answers:

Need help?

Do you have a question about the HP L1740 and is the answer not in the manual?

General

3D	No
Response time	8 ms
Display diagonal	17 \
Display resolution	1280 x 1024 pixels
Viewing angle, vertical	135 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	500:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	150 °
Digital vertical frequency	56 - 76 Hz
Digital horizontal frequency	30 - 83 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	720 x 400, 832 x 624, 1152 x 870, 1024 x 768 (XGA), 1360 x 768 (WXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
USB hub version	2.0
DVI-I ports quantity	0
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Power consumption (max)	60 W
Power consumption (average)	33 W
Power consumption (standby)	2 W
Power consumption (typical)	40 W
Product color	Black, White
Country of origin	China
Package weight	8800 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions