To Next Page

To Previous Page

Energy saver feature

This monitor supports a reduced power state.

The reduced power state is initiated if the monitor detects the absence of either the horizontal sync signal or

the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blank, the

backlight is turned o, and the power light turns amber. In the reduced power state, the monitor uses < 0.5 W

of power. There is a brief warm-up period before the monitor returns to its normal operating state.

See the computer manual for instructions on setting the energy saver mode (sometimes called “power

management feature”).

NOTE: This power saver feature works only when the monitor is connected to a computer that has energy-

saver features.

By selecting the settings in the monitor Sleep Timer utility, you can also program the monitor to initiate the

reduced power state at a predetermined time. When the monitor Sleep Timer utility initiates the reduced

power state, the power light blinks amber.

30 Appendix A Technical specications

Questions and Answers:

Need help?

Do you have a question about the HP M27fd and is the answer not in the manual?

HP M27fd Specifications

General