Troubleshooting
Maintenance and Service Guide 2–3
Selecting from the Security Menu
Table 2-2
Security Menu
Select To Do This
Setup Password Enter, change, or delete an Setup password.
Power-On Password Enter, change, or delete a power-on password.
Password Options
(Password options can
be selected only when
a power-on password
has been set.)
Enable/disable:
■ Stringent security.
■ Requirement of password on restart.
DriveLock Passwords Enable/disable DriveLock; change a DriveLock
user or master password.
✎
DriveLock Settings are accessible only
when you enter Computer Setup by turning
on (not restarting) the computer.
Smart Card Security Enable/disable smart card power-on support.
✎
A setup password must be established to
use this feature.
TPM Embedded Security Enable/disable:
■ Embedded security device state.
■ Power-on authentication support.
■ Automatic DriveLock support.
System IDs Establish:
■ Notebook asset tracking number.
■ Notebook ownership tags.
Disk Sanitizer Establish fast, optimum, or custom settings for
disk sanitizing.
*Not applicable to SuperDisk LS-120 drives.
To Next Page
Loading...
Need help?
General