HP Pro 3000 SFF User Manual

Bezel Blanks
1. Prepare the computer for disassembly (Preparation for Disassembly on page 84).
2. Remove the access panel (
Access Panel on page 85).
3. Remove the front bezel (
Front Bezel on page 86).
4. While facing the inside of the front bezel, press the two retaining tabs on the right towards the
outer edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 7-3 Removing a Bezel Blank
Bezel Blanks 87

HP Pro 3000 SFF Specifications

General

Brand	HP
Model	Pro 3000 SFF
Category	Desktop
Language	English