HP Pro x2 612 G2 User Manual

5. What is meant by “Restore the nonvolatile memory found in Intel-based system boards”?
This message relates to clearing the Real Time Clock (RTC) CMOS memory that contains computer
conguration data.
6. How can the BIOS security be reset to factory defaults and data erased?
IMPORTANT: Resetting will result in the loss of information.
These steps will not reset Custom Secure Boot Keys. See question and answer 7 for information about
resetting the keys.
a.
○
Computers or tablets with keyboards:
▲ Turn on or restart the computer, and when the HP logo appears, press f10 to enter
Computer Setup.
○
Computers or tablets without keyboards:
▲ Turn o the computer. Press the power button, quickly press the volume down button
until the Startup menu is displayed, and then tap f10 to enter Computer Setup.
NOTE: If the system has a BIOS administrator password, enter the password at the prompt.
b. Select Main, and then select Reset Security to Factory Defaults.
c. Follow the on-screen instructions.
d. Select Main, select Save Changes and Exit, and then follow the on-screen instructions.
7. How can the Custom Secure Boot Keys be reset?
Secure Boot is a feature to ensure that only authenticated code can start on a platform. If you enabled
Secure Boot and created Custom Secure Boot Keys, simply disabling Secure Boot will not clear the keys.
You must also select to clear the Custom Secure Boot Keys. Use the same Secure Boot access procedure
you used to create the Custom Secure Boot Keys, but make the selection to clear or delete all Secure
Boot Keys.
a.
○
Computers or tablets with keyboards:
▲ Turn on or restart the computer, and when the HP logo appears, press f10 to enter
Computer Setup.
○
Computers or tablets without keyboards:
▲ Turn o the computer. Press the power button, quickly press the volume down button
until the Startup menu is displayed, and then tap f10 to enter Computer Setup.
NOTE: If the system has a BIOS administrator password, enter the password at the prompt.
b. Select the Security menu, select Secure Boot Conguration, and then follow the on-screen
instructions.
c. At the Secure Boot Conguration window, select Secure Boot, select Clear Secure Boot Keys, and
then follow the on-screen instructions to continue.
Using HP Sure Start (select models only)
Select computer models are congured with HP Sure Start, a technology that continuously monitors your
computer's BIOS for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start
restores the BIOS to its previously safe state, without user intervention. Those select computer models ship
with HP Sure Start congured and enabled. HP Sure Start is congured and already enabled so that most
94 Chapter 12 Statement of memory volatility

HP Pro x2 612 G2 Specifications

General

Operating system architecture	64-bit
HD type	WUXGA+
Display diagonal	12 \
Display resolution	1920 x 1280 pixels
Internal memory	4 GB
Memory clock speed	1600 MHz
Internal memory type	LPDDR3-SDRAM
Maximum internal memory	- GB
Optical drive type	No
Compatible memory cards	MicroSD (TransFlash)
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
SSD interface	Serial ATA
SSD form factor	M.2
Storage media type	SSD
Total storage capacity	128 GB
Graphics card	HD Graphics 615
Graphics card manufacturer	Intel
Discrete graphics card model	Not available
On-board graphics card model	Intel® HD Graphics 615
Chassis type	Tablet
Product color	Black
Processor cache	2 MB
Processor cores	2
Processor family	Intel® Pentium®
Processor frequency	1.5 GHz
Antenna type	2x2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.2
WLAN controller model	Intel Dual Band Wireless-AC 8265
Sustainability certificates	ENERGY STAR
Rear camera HD type	HD
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	5 MP
Battery capacity	41.58 Wh
Number of battery cells	4

Weight and Dimensions

Depth	91 mm
Width	300 mm
Height	213.8 mm
Weight	850 g