HP Pro x2 612 G2 User Manual

9 Using HP PC Hardware Diagnostics (UEFI)
HP PC Hardware Diagnostics is a Unied Extensible Firmware Interface (UEFI) that allows you to run diagnostic
tests to determine whether the computer hardware is functioning properly. The tool runs outside the
operating system so that it can isolate hardware failures from issues that are caused by the operating system
or other software components.
When HP PC Hardware Diagnostics UEFI detects a failure that requires hardware replacement, a 24-digit
Failure ID code is generated. This ID code can then be provided to support to help determine how to correct
the problem.
To start HP PC Hardware Diagnostics (UEFI), follow these steps:
1. Start BIOS.
●
Tablets with keyboards
▲ Turn on or restart the computer, quickly press esc.
●
Tablets without keyboards
▲ Turn on or restart the computer, and then quickly hold down the volume down button.
2. Press or tap f2.
The BIOS searches three places for the diagnostic tools, in the following order:
a. Connected USB drive
NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading
HP PC Hardware Diagnostics (UEFI) to a USB device on page 82.
b. Hard drive
c. BIOS
3. When the diagnostic tool opens, select the type of diagnostic test you want to run, and then follow the
on-screen instructions.
NOTE: To stop a test, press the button you used to access UEFI.
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device
NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English only, and you
must use a Windows computer to download and create the HP UEFI support environment because only .exe
les are oered.
There are two options to download HP PC Hardware Diagnostics to a USB device.
Download the latest UEFI version
1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.
2. In the HP PC Hardware Diagnostics section, select the Download link, and then select Run.
82 Chapter 9 Using HP PC Hardware Diagnostics (UEFI)

HP Pro x2 612 G2 Specifications

General

Operating system architecture	64-bit
HD type	WUXGA+
Display diagonal	12 \
Display resolution	1920 x 1280 pixels
Internal memory	4 GB
Memory clock speed	1600 MHz
Internal memory type	LPDDR3-SDRAM
Maximum internal memory	- GB
Optical drive type	No
Compatible memory cards	MicroSD (TransFlash)
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
SSD interface	Serial ATA
SSD form factor	M.2
Storage media type	SSD
Total storage capacity	128 GB
Graphics card	HD Graphics 615
Graphics card manufacturer	Intel
Discrete graphics card model	Not available
On-board graphics card model	Intel® HD Graphics 615
Chassis type	Tablet
Product color	Black
Processor cache	2 MB
Processor cores	2
Processor family	Intel® Pentium®
Processor frequency	1.5 GHz
Antenna type	2x2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.2
WLAN controller model	Intel Dual Band Wireless-AC 8265
Sustainability certificates	ENERGY STAR
Rear camera HD type	HD
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	5 MP
Battery capacity	41.58 Wh
Number of battery cells	4

Weight and Dimensions

Depth	91 mm
Width	300 mm
Height	213.8 mm
Weight	850 g