HP Pro x2 612 G2 User Manual

4 Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T5 screwdriver
●
Tweezers
●
Thin plastic tool
●
Paper clip or thin wire
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care
when handling the plastic
Tools required 25

HP Pro x2 612 G2 Specifications

General

Operating system architecture	64-bit
HD type	WUXGA+
Display diagonal	12 \
Display resolution	1920 x 1280 pixels
Internal memory	4 GB
Memory clock speed	1600 MHz
Internal memory type	LPDDR3-SDRAM
Maximum internal memory	- GB
Optical drive type	No
Compatible memory cards	MicroSD (TransFlash)
USB 2.0 ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
SSD capacity	The Solid State Drive's storage capacity in Gigabytes.
SSD interface	Serial ATA
SSD form factor	M.2
Storage media type	SSD
Total storage capacity	128 GB
Graphics card	HD Graphics 615
Graphics card manufacturer	Intel
Discrete graphics card model	Not available
On-board graphics card model	Intel® HD Graphics 615
Chassis type	Tablet
Product color	Black
Processor cache	2 MB
Processor cores	2
Processor family	Intel® Pentium®
Processor frequency	1.5 GHz
Antenna type	2x2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.2
WLAN controller model	Intel Dual Band Wireless-AC 8265
Sustainability certificates	ENERGY STAR
Rear camera HD type	HD
Rear camera resolution (numeric)	8 MP
Front camera resolution (numeric)	5 MP
Battery capacity	41.58 Wh
Number of battery cells	4

Weight and Dimensions

Depth	91 mm
Width	300 mm
Height	213.8 mm
Weight	850 g