5-31
RADIUS Authentication, Authorization and Accounting
Configuring RADIUS Accounting
For example, to configure RADIUS accounting on the switch with start-stop
for exec functions and stop-only for system functions:
Figure 5-9. Example of Configuring Accounting Types
3. (Optional) Configure Session Blocking and Interim
Updating Options
These optional parameters give you additional control over accounting data.
â– Updates: In addition to using a Start-Stop or Stop-Only trigger, you
can optionally configure the switch to send periodic accounting
record updates to a RADIUS server.
â– Suppress: The switch can suppress accounting for an unknown user
having no username.
To continue the example in figure 5-9, suppose that you wanted the switch to:
â– Send updates every 10 minutes on in-progress accounting sessions.
â– Block accounting for unknown users (no username).
Configures exec and system
accounting and controls.
Summarizes the switch’s
accounting configuration.
Exec and System accounting are
active. (Assumes the switch is
configured to access a reachable
Syntax: [no] aaa accounting update periodic < 1 - 525600 >
Sets the accounting update period for all accounting ses-
sions on the switch. (The no form disables the update
function and resets the value to zero.) (Default: zero; dis-
abled)
Syntax: [no] aaa accounting suppress null-username
Disables accounting for unknown users having no user-
name. (Default: suppression disabled)
To Next Page
Loading...
Need help?
General
