5-35
RADIUS Authentication, Authorization and Accounting
Viewing RADIUS Statistics
RADIUS Authentication Statistics
Figure 5-13. Example of Login Attempt and Primary/Secondary Authentication
Information from the Show Authentication Command
Figure 5-14. Example of RADIUS Authentication Information from a Specific Server
Syntax: show authentication
Displays the primary and secondary authentication meth-
ods configured for the Console, Telnet, Port-Access (802.1X),
and SSH methods of accessing the switch. Also displays the
number of access attempts currently allowed in a session.
show radius authentication
Displays NAS identifier and data on the configured RADIUS
server and the switch’s interactions with this server.
(Requires prior use of the radius-server host command to
configure a RADIUS server IP address in the switch. See
“Configuring RADIUS Accounting” on page 5-25.)
To Next Page
Loading...
Need help?
General
