To Next Page

To Previous Page

C Restoring the Flash Image

System Requirements

To create a recovery device for the purpose of reashing or restoring the software image on the ROM, you will

need the following:

●

A personal computer running Windows 7, Windows 8.1, or Windows 10.

●

One or more HP t730 Thin Clients

●

8-GB USB ash device for Microsoft Windows Embedded Standard 7 (WES 7) (if using the USB format) or

Linux.

This restore method will not work with all USB ash devices. USB ash devices with multiple

partitions generally do not support this restore method. The range of USB ash devices available on the

market is constantly changing. Not all USB ash devices have been tested with the HP Thin Client

Imaging Tool.

Before using the utility, you must download the appropriate image from http://www.hp.com.

Getting Started

There are two deployment options supported by this utility. You can choose to do one or more of the

following using your personal computer:"

●

Create a bootable ash image on a USB ash device.

●

Unbundle the image to a directory for use in a custom deployment scenario or PXE image.

Download and run the Package-for-the-Web deliverable (an .exe le) that contains the original factory image

for the thin client. The HP Thin Client Imaging Tool (CRStart.exe) runs automatically.

Choose one of the deployment options: Each option is described in the following paragraphs.

●

USB Format

●

Deployment

During the restore process, the thin client ash drive will be reformatted and all data on it will be erased

before the system image is copied to it. To prevent loss of data, be sure that you have saved any user-

created data from the ash drive. During the rst restart of the thin client following the restore process,

it may take approximately 15 minutes to unbundle the software before the Windows Desktop is

displayed.

System Requirements 39

HP t730 User Manual

Other manuals for HP t730