Making a Call
4
◆ Step 6: Place the device
!
Warning
To prevent electrical devices from being
interfered by wireless signals, place electrical
devices one meter away from the device.
The device can be placed horizontally on a table,
hanging against the wall, or standing against the
pedestal. Place the device on a higher place or near
the window, so it can receive stronger signals.
◆ Step 7: Power On/Off
Press and hold the On/ Off button to power on or off
the device.
Making a Call
When you hear the dial tone after picking up the
handset, you can make a call.
Dial-up Access
By default, the device dials up to access the Internet
as required. You can directly use the network
services such as web browsing, and receiving or
sending emails.
Logging In to the Management Page
1 Start the Internet browser and enter the address
http://192.168.1.1 in the address bar.
2 Select a user type, enter the password, and then
click Login.
• Admin: This user type is authorized to view and
change configurations. The default password is
admin.
• User: This user type is authorized to view only the
basic status information. The default password is
u
ser.
Note
To avoid the configuration conflict, only one
user is allowed to log in to the management
page at a time.
To Next Page
Loading...
Need help?
General
