2 Typical Configurations
2.1 Typical Application Scenarios
Based on the product layout, there are three types of architecture: smart module A (with the
battery cabinet in the aisle containment), smart module A (without the battery cabinet in the
aisle containment) and smart module B.
⚫
For smart module A (with the battery cabinet in the aisle containment), the UPS, air
conditioners, and batteries are installed inside the module.
⚫
For smart module A (without the battery cabinet in the aisle containment), the batteries
are installed outside the module while the UPS and air conditioners are installed inside
the module.
⚫
For smart module B, the UPS and batteries are installed outside the module while the
precision power distribution cabinet (PDC) or new main way is inside the module.
This document uses the smart module A as an example.
2.2 Typical Configurations
The Smart Module is typically configured with the single-row or dual-row 1200 mm wide
aisle containment.