Figure 3-46 Management system inside the smart module (new main way)
The smart module provides the WiFi and RF_Z wireless networking functions. The mobile
app can be connected by wireless networking. Certain southbound components (such as the
skylight actuator, AC actuator, multi-functional sensor, and access actuator) can be connected
by RF_Z wireless networking.
The management system provides a GUI to implement comprehensive management functions
based on requirements. The system can monitor the following equipment:
⚫
Power equipment, including precision air conditioners, UPSs, and ATSs
⚫
Environment monitoring equipment, including multi-functional sensors (smoke,
temperature, and humidity sensors) and water sensors
⚫
Video equipment, including cameras and network video recorders VCN500.
⚫
Access control equipment: A standard access management system is integrated to
manage and monitor key information such as door status, card swiping, and permission
setting.
⚫
Standard network management interface: The NetEco provides SNMP interfaces to
communicate with third-party NMSs. The system can be customized to support other
protocols for the access from different devices.
3.4.2 Server
Tecal RH2288V2 Server
The Tecal RH2288V2 rack server (RH2288V2 for short) of Huawei features large capacity
and high performance and can meet customers' medium and long term requirements. It serves
as the monitoring host of the NetEco and is responsible for data processing and analysis.
The RH2288V2 is 2 U high, and can be installed in a standard rack. Figure 3-47 shows an
RH2288V2.Table 3-37 lists the specifications.
To Next Page
Loading...
Need help?
General
