Huawei FusionModule5000 User Manual

Parameter Description Setting
Switch controls Specifies whether audio signals
collected by audio input devices,
excluding the microphone array, are
transmitted to your TE30 when you
turn off the microphone array.
l MIC array only: Your TE30
can receive audio signals
collected by audio input devices,
excluding the microphone array,
when you turn off the
microphone array.
l All audio inputs: Your TE30
cannot receive audio signals
collected by any audio input
devices when you turn off the
microphone array.
To enable your TE30 to receive
audio signals again, perform any of
the following:
l Press the button on the
microphone array to enable this
function.
l Press the microphone button on
the remote control to turn on the
microphone array only or all
audio input devices, depending
on the Switch controls value.
l On the TE30 web interface,
choose Device Control > Audio
Control and select the audio
input ports you want to enable.
l On the remote controlled UI,
choose Advanced Settings >
Settings > Audio > Audio
Input and select the audio input
ports you want to enable.
The default value is
MIC array
only.
Turn to Mute Specifies whether to mute the
microphone at your site when the
camera rotates to prevent noise
caused by the rotation.
The default value is Enable.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 5 Microphone and Speaker
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
42

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English