15
Step 1
Enable the HG659b’s WPS function.
1. Log in to the web management page.
2. In the navigation tree, choose Home Network > WLAN
Access.
3. Select Enable WPS to enable the WPS function.
4. In WPS configuration, click WPS by push button
(PBC), and click Save.
Step 2
Press the WPS button on the wireless device to start WPS
negotiation. For details, see the user guide for the wireless
device.
Step 3
Within 2 minutes, press and hold the WPS button on the
HG659b for 1 second or more. The WPS button indicator
blinks.
When the WPS button indicator on the HG659b is steady on, a
connection between the HG659b and wireless device is set up. The
WPS button indicator is on for 300 seconds.
To Next Page
Loading...
Need help?
General
