2
Number Port or
Button
Description
5 Reset Restores the HG659b to its default settings
after you press and hold this button for 8
seconds to 10 seconds while the HG659b is
powered on.
CAUTION
A reset will result in all custom data and
settings being lost. Use with caution.
6 DSL Used to connect to the MODEM port on the
splitter or connect to the telephone wall
jack.
7 Phone1~
Phone2
Connects to a telephone.
8 LAN1 ~
LAN4
Connects to Ethernet devices, such as
computers, set-top boxes (STBs), and
switches.
9 WAN Connects to an Ethernet device that
provides Internet access, such as a fibre
ONT, modem or switch.
10 USB Connects to a USB device, such as a USB
storage device or a printer.
CAUTION
If you connect a USB device to the
HG659b, verify that the input voltage and
current of the USB device does not exceed
5 V/0.65 A. Otherwise, the HG659b may
malfunction.
To Next Page
Loading...
Need help?
General
