22
7 Appendix
7.1
Indicators
Indicator Status Description
On The MT882a is powered on. POWER
Off The MT882a is powered off.
Blinking The MT882a is being activated.
On The MT882a is activated.
ADSL
Off The MT882a is powered off.
Blinking
Data is being transmitted through the Ethernet
interface.
On The Ethernet connection is set up.
LAN
Off The Ethernet connection is not set up.
Blinking Data is being transmitted on the USB port.
On The USB port is connected.
USB
Off The USB port is not connected.
7.2
Interfaces and Buttons
Interface/Button Description
POWER
The POWER interface on the other models of terminals
connects the terminal to a power adapter.
USB This interface connects the terminal to the USB port on a PC.
LAN It is used to connect to the Ethernet interface on the computer.
RESET You can restore the default settings by pressing this button.
Note: After you restore the default settings, the customized
data will be lost. Therefore, use this function with caution.
ADSL It is used to connect to the MODEM interface on the splitter.
To Next Page
Loading...
Need help?
General
