7 Man-Machine Interaction
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6. Manually shut down the SUN2000.
a. Choose Power-Off and press .
b. Press again to confirm the operation.
----End
7.2.13 Restoring Factory Settings
Factory settings for the SUN2000 can be restored on the monitoring panel. The operation will
restore all configured parameters except the current date and time to their factory settings. The
operation will not impact alarm records, system logs, and operating information.
Context
Perform this operation with caution because all configured parameters except the current
date and time will be restored to their factory settings.
If PV strings are grounded, install a three-phase four-wire isolation transformer and set
Isolation to Input Grounded, With TF.
Procedure
The following table lists the procedure for restoring factory settings. The parameter
values in the figures are for reference only.
To Next Page
Loading...
Need help?
General