Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.4.8.2 About
To view the version information, choose > About from the Operation console screen.
Figure 7-56 About
7.5 App Operations by the User
7.5.1 Logging In to the App
Prerequisites
You have logged in as installer and followed the instructions on the Quick setting
screen.
The corresponding SUN2000 is displayed on the Inverter screen.
Procedure
Step 1 On the Inverter screen, tap the corresponding SUN2000, select user, enter the password, and
log in to the app.
The name of the connected SUN2000 is represented by its (SN), which can be found on the SN label
attached to the side of the SUN2000.
The login password is the same as that for the SUN2000 connected to the app and is used only when
the SUN2000 connects to the app.
The initial password is 00000a. Use the initial password for first login. To ensure account security,
change the password immediately after login.
To Next Page
Loading...
Need help?
General