Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Storage
The following requirements should be met when the SUN2000 needs to be stored prior to
installation:
Do not unpack the SUN2000.
Keep the storage temperature at –30°C to +60°C and the humidity at 5%–95% RH.
The SUN2000 should be stored in a clean and dry place and be protected from dust and
water vapor corrosion.
A maximum of 10 SUN2000s can be stacked. To avoid personal injury or device damage,
stack SUN2000s with caution to prevent them from falling over.
Regular inspection is required during the storage. Replace the packing materials when
necessary.
After long-term storage, an inspection and test are necessary before the SUN2000 is put
into use. The inspection and test must be conducted by qualified personnel.
To Next Page
Loading...
Need help?
General