17
PROGRAMMING THE CONTROLLER ...................................................................................
The SRC Plus Controller is simple to program. The easy to understand
dial design allows you to step through the process of programming and
activate manual watering with a twist of the dial.
The SRC Plus display shows time and day when the controller is idle.
The display changes when the dial is rotated to indicate the specific
programming information to enter. When programming, the flashing
portion of the display can be changed by pressing the
or buttons.
To change something that is not flashing, press the
button until the
desired field is flashing.
The SRC Plus also provides a reference label that is attached to the inside
of the controller door (no more lost or misplaced instructions!). And,
extra space is provided to write in sprinkler station location information.
A full three programs, each with the ability to have four daily start times,
permit plants with different watering requirements to be separated
on different day schedules. Multiple start times permit morning,
afternoon, and evening watering, perfect for the establishment of new
lawns and thirsty annual flowers. A built-in 365 day calendar clock
accommodates odd/even watering restrictions without requiring
monthly reprogramming. Or just simply designate the days of the week
you want to water. The SRC Plus makes it easy.
NOTE: A basic programming rule is that whatever
symbol or character is flashing will be the item
programmed. For instance, if the hour is flashing
when setting the time, the hour can be changed or
programmed. For illustration purposes, flashing
characters are in
GRAY type.
To activate a program in your controller, you must enter the
following information:
1. Set current day and time–turn dial to SET CURRENT DATE/TIME
.
2. Set what time of day you would like the program to start–turn dial to
SET PROGRAM START TIMES.
3. Set how long each valve will water–turn dial to SET STATION
RUN TIMES.
4. Set the day(s) you would like the program to water–turn dial to
SET DAYS TO WATER.
NOTE: All stations operate in numerical order. Only
one program start time is required to activate a
watering program.
To Next Page
Loading...
Need help?
General
