English – 36
Technical data
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production engine for the engine model measured to SAE
standard J1349/ISO1585. Mass production engines may differ from this value. Actual power output for the engine installed on the final machine will depend on the
operating speed, environmental conditions and other values.
Note 2: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s
2
(steering wheel) and
0.8 m/s
2
(seat).
Dimensions Rider 220T Rider 322T AWD
Length without cutting unit, mm/ft 2020/6,61 2020/6,61
Width without cutting unit, mm/ft 890/2,92 890/2,92
Height, mm/ft 1150/3,77 1150/3,77
Operating weight with cutting deck, kg/lb 285-288-301/628-635-664 308-311-324/679-686-714
Wheel base, mm/ft 887/2,91 887/2,91
Track width, front, mm/ft 712/2,34 712/2,34
Track width, rear, mm/ft 627/2,06 627/2,06
Tyre dimensions 16 x 6,50 x 8 16 x 6,50 x 8
Air pressure, rear - front, kPa / bar / PSI 60 (0,6/8,5) 60 (0,6/8,5)
Cutting width, cm/inch 103-112-122 / 41-44-48 103-112-122 / 41-44-48
Engine
Brand / Model Brigs&Stratton 7220 Endurance Twin Brigs&Stratton 7220 Endurance Twin
Nominal engine output, kW (see note 1) 12,6 12,6
Displacement, cm
3
/cu.in 656/40 656/40
Fuel, minimum octane grade lead-free 87 87
Tank volume, litres/USqt 12/13 12/13
Oil
Oil volume incl. filter 1,7/1,8 1,7/1,8
Oil volume excl. filter, litres/USqt 1,5/1,6 1,5/1,6
Starting Electric start 12V Electric start 12V
Max.motor speed, r/min 3000
± 100 3000 ± 100
Electrical system
Type 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah
Spark plug EMS Platinum EMS Platinum
Electrode gap, mm/inch 0,75/0,030 0,75/0,030
Lights Osram, 2X12V 20W Osram, 2X12V 20W
Vibration levels
(see note 2)
Vibration level on the steering wheel, m/s
2
2,5 2,5
Vibration level in the seat, m/s
2
0,7 0,7
Transmission
Brand Tuff Torq K46 K 574 KTM 10L
Oil, class SF-CC SAE 10W/40 SAE 10W/50 Synthetic
Cutting unit
Type Combi 103 Combi 103
Combi 112 Combi 112
SD 48
SD 48