EasyManuals Logo
Home>Husqvarna>Motorcycle>TE 250

Husqvarna TE 250 User Manual

Husqvarna TE 250
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
9 RIDING INSTRUCTIONS
38
401944-10
Take the motorcycle off side stand
1
and secure the side
stand with rubber strap
2
.
Shift the transmission into neutral.
(All EU/AR/CN standard models)
Turn the emergency OFF switch to the position .
Condition
Ambient temperature: < 10 °C (< 50 °F)
Pull the cold start button out all the way and turn it by a ¼
turn.
Info
If the engine is warm, the cold start button must
be deactivated.
400733-01
Press the start button.
Info
Do not open the throttle.
Press the start button for a maximum of 5 seconds.
Wait for 30 seconds before a further attempt at start-
ing.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-
ion battery and thereby increase the starting power.
During the starting process, the malfunction indicator
lamp lights up.
9.3 Starting off
Info
Switch on the light before riding the vehicle. You will be seen earlier by other motorists.
When you are riding, the side stand must be folded up and secured with the rubber strap.
Pull the clutch lever, shift into first gear, release the clutch lever slowly and at the same time open the throt-
tle carefully.
9.4 Shifting, riding
Warning
Danger of accidentsIf you change down at high engine speed, the rear wheel blocks and the engine
races.
Do not change into a low gear at high engine speed.

Table of Contents

Other manuals for Husqvarna TE 250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna TE 250 and is the answer not in the manual?

Husqvarna TE 250 Specifications

General IconGeneral
BrandHusqvarna
ModelTE 250
CategoryMotorcycle
LanguageEnglish

Related product manuals