29 - ENG
Spark Arrestor
(Applicable types)
1. Allow the engine to cool completely before servicing the spark arrestor.
2. Remove the two screws holding the cover plate which retains the end of the spark
arrestor to the muffler.
3. Remove the spark arrestor screen.
4. Carefully remove the carbon deposits from the spark arrestor screen with a
wirebrush.
5. Replace the spark arrestor if it is damaged.
6. Reinstall the spark arrestor in the muffler and attach with the two screws.
Clean carbon deposits
Idle Speed
The idle speed has been pre-set at the factory and should rarely
requirereadjustment
Improper adjustment of idle speed will damage your engine and void
yourwarranty.
Adjustment
Except as described in this Manual, there is no additional maintenance or adjustment
required for your engine.
Improper adjustments or tampering can damage your engine and your equipment
and will void your warranty.
Tampering with the factory set governor will damage your engine and void
yourwarranty.
To Next Page
Loading...
Need help?
General