Hypertherm POWERMAX 800 User Manual

4-11
PARTS LIST
Service Manual
797
Figure 5-8 PAC121MS Torch Assembly and Leads
Screw
075322
Screw (3)
075321
O-Ring
044016
Torch Sleeve
020559
Pigtail
Torch Position
Sleeve
020620
On/Off Pendant (not part of machine torch assembly -
See
Powermax800 Field Upgrade Kits and Optional Parts later
in this section for part numbers)
Torch Lead
028923, with pigtail, 14 ft (4.3 m)
028918, with pigtail, 25 ft (7.6 m)
028926, with pigtail, 35 ft (10.6 m)
028919, with pigtail, 50 ft (15.2 m)
128123, no pigtail, 14 ft (4.3 m)
128125, no pigtail, 25 ft (7.6 m)
128126, no pigtail, 35 ft (10.6 m)
128127, no pigtail, 50 ft (15.2 m)
Torch Main
Body
120558
PAC121MS Torch Assembly and 14 ft (4.3 m) Lead - 083049 w/pigtail, 083054 no pigtail
PAC121MS Torch Assembly and 25 ft (7.6 m) Lead - 083011 w/pigtail, 083056 no pigtail
PAC121MS Torch Assembly and 35 ft (10.6 m) Lead - 083044 w/pigtail, 083057 no pigtail
PAC121MS Torch Assembly and 50 ft (15.2 m) Lead - 083012 w/pigtail, 083058 no pigtail
Part Number Description
020351 ...................................... Electrode
020361 ...................................... Ring, Swirl
020559 ...................................... Sleeve, Machine Torch, PAC121M
020620 ...................................... Sleeve, Torch Position, PAC121M
028923 ...................................... Torch Lead w/pigtail, 14 ft (4.3 m)
028918 ...................................... Torch Lead w/pigtail, 25 ft (7.6 m)
028926 ...................................... Torch Lead w/pigtail, 35 ft (10.6 m)
028919 ...................................... Torch Lead w/pigtail, 50 ft (15.2 m)
128123 ...................................... Torch Lead, no pigtail, 14 ft (4.3 m)
128125 ...................................... Torch Lead, no pigtail, 25 ft (7.6 m)
128126 ...................................... Torch Lead, no pigtail, 35 ft (10.6 m)
128127 ...................................... Torch Lead, no pigtail, 50 ft (15.2 m)
044009 ............................................ Quick Disconnect O-Ring (not shown)
075321 ...................................... Socket Cap, 4-40 X 1/2, HX, SS
075322 ...................................... M/S, 4-40 X 1/4, SL, SZ
120282 ...................................... Nozzle: PAC121 50A Shield
120326 ...................................... Shield: PAC121M Machine Torch
120301 ...................................... Cap, Retaining
120558 ...................................... Torch Main Body w/ Switch, PAC121M
044016 ............................................ O-Ring: BUNA 90 Duro .614X.070
Note: See page 4-12 for detail of consumable parts
12-97

Hypertherm POWERMAX 800 Specifications

General

Brand	Hypertherm
Model	POWERMAX 800
Category	Cutter
Language	English