24
The all call ID must be complied with the dialing rules. For details, consult your dealer.
Through Call Logs
1.
Press the preprogrammed BackDial Call or ReDial Call key.
2.
Select the all call record.
3.
Press the P5/Answer key on the radio, or press the Answer key or the PTT key on the palm microphone.
Through One Touch Call/Menu
With the One Touch Call/Menu feature enabled, press the preprogrammed One Touch Call/Menu key.
6.3.2 Receiving an All Call
You can answer an all call without any operation.
6.3.3 Ending an All Call
Conventional mode
An all call ends when the calling party releases the PTT key.
Trunking mode
A private call ends in any of the following cases:
The calling party presses the P6/End key or places the palm microphone back to the hanger.
The call duration preset by your dealer expires.
The base station signal is lost.
The calling party changes the contact with the Clear Down feature enabled.
6.4 Broadcast Call (Trunking Only)
A broadcast call is a special group call, during which only the calling party can transmit voice.
The Broadcast Call feature is enabled by your dealer.
6.4.1 Initiating a Broadcast Call
6.4.1.1 Through Contact List
Do either of the following:
Press the Back/Subgroup key or the preprogrammed Current Subgroup Contact key, and then select the
subgroup and group contact.
To Next Page
Loading...
Need help?
General
