Assembly
21
www.hyundaipowerproducts.co.uk
01646 687 880 sales@hyundaipowerproducts.co.uk
Step 2 : Fixing Upper Handle
Take the upper quick release clamps from the bag and remove the thumbscrew nut and
washer. Make sure Upper Handle is the correct way up with red Start Button on top.
1
Pass the clamp bolt through the upper handle hole from the outside. Then pass through the
lower handle hole. Fit the washer and nut on the inside of the handle.
2
With the clamp closed, tighten the thumbscrew to lock the handle. You can then use the
quick release clamp to loosen upper handle and fold over handle for storage.
3
Fit the two cable clips to retain black cable from the handle to the motor.
4