Maintenance
29
www.hyundaipowerproducts.co.uk
01646 687 880 sales@hyundaipowerproducts.co.uk
CAUTION - DO NOT use a hose pipe or pressure washer to clean the machine.
NOTE Machine must be switched off and disconnected from the power supply.
!
!
After Each Use
• You must remove grass and mud from the machine to prevent it from drying. This will cause
problems the next time the machine is used.
• Wipe the machine down with a cloth.
• For larger build ups of debris, use a scraper or similar product.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use.
Cleaning
Make sure the power has been disconnected to the lawnmower
1
Clean the cooling vents to the motor to prevent overheating. There are vents on the top of the
mower and under the deck of the mower.
2
Tip the mower on its side and wear gloves to protect yourself from the blade.
3
Clean the old grass clippings away using a stiff brush.
4
Clean the old grass from around the roller and wheels.
5
Do not use a water jet or pressure washer to clean the machine. This will damage the electric
motor.
6
Use a damp cloth with mild detergent to clean the top casing.
7
COOLING
VENTS
COOLING AIR VENTS