Hyundai Matrix User Manual

6
DO-IT-YOURSELF MAINTENANCE
32
To check the power steering fluid
level, be sure the ignition is "OFF",
then check to make certain that the
power steering fluid level is between
the "MAX" and "MIN" level markings
on the fluid reservoir.
NOTE:
Grinding noise from the power
steering pump may be heard im-
mediately after the engine is started
in extremely cold conditions (be-
low - 20°C). If the noise stops dur-
ing warm up, there is no abnormal
function in the system. It is due to
a power steering fluid characteris-
tic in extremely cold conditions.
Recommended Fluid
Use PSF-3 type fluid
NOTE:
Do not start the engine when the
power steering oil reservoir is
empty.
!
CHECKING ELECTRIC
COOLING FANS
G220A01A-AAT
WARNING:
The cooling fan is controlled by
engine coolant temperature and
may sometimes operate even when
the engine is not running. Use
extreme caution when working
near the blades of the cooling fan,
so that you are not injured by a
rotating fan blade. As the engine
coolant temperature decreases the
fan will automatically shut off. This
is a normal condition.
POWER STEERING FLUID
LEVEL
G220B01A-AAT
Checking Engine Cooling Fan
The engine cooling fan should come
on automatically if the engine coolant
temperature is high.
G220C01A-AAT
Checking Condenser Cooling
Fan
The condenser cooling fan should
come on automatically whenever the
air conditioning is in operation.
G230A03A-GAT
HFC5004
G230A02FC
Gasoline engine
Diesel engine
The power steering fluid level should
be checked regularly.

Hyundai Matrix Specifications

General

Brand	Hyundai
Model	Matrix
Category	Automobile
Language	English